Pudu CC1 vs. Gausium Scrubber 75: which cleaning robot fits your floor plan

The short answer: the Pudu CC1 is a compact 4-in-1 combo built for mixed floors — offices, malls, retail, mixed-floor hospitals. The Gausium Scrubber 75 is a large-area scrubber built for big open concrete — warehouses, manufacturing floors, casinos, airports. They are not two prices for the same job. They are two different machines for two different floor plans, and picking between them starts with your building, not a spec sheet.

We deploy and service both. Here is what each one actually does, where each one wins, and how to tell which fits your site.

The CC1: one machine for a mixed building

The Pudu CC1 is a 4-in-1 combo unit — it sweeps, scrubs, vacuums, and washes from one chassis. That matters most in a building where the floor changes room to room: tile in the lobby, carpet in the corridor, vinyl in the break room. Instead of running three single-purpose robots, one CC1 switches jobs as it moves.

It runs roughly 5 hours on a charge doing scrubbing, or sweep, vacuum, and wash together, and up to about 9 hours in a quieter wash-only mode, moving at up to 1.2 m/s. It self-docks, refills its own water, and drains itself when it's done — no one has to babysit it between jobs.

That combination of small footprint and multi-surface capability is why the CC1 fits malls and shopping centers, offices and corporate campuses, retail floors, and hospitals and senior-living facilities with mixed floors. These are buildings with people walking through them all day, several floor types in close range, and no single acre of open concrete to justify a dedicated large-area machine.

There's also a CC1 Pro, which adds a rear-facing AI camera that detects leftover stains, triggers a spot re-clean, and generates a cleaning-quality heatmap. That's worth knowing about if your building needs logged proof of clean — a hospital or a retail chain answering to a compliance or facilities audit, for instance.

The Scrubber 75: built for the big open slab

The Gausium Scrubber 75 is a different category of machine entirely — a large-area scrubber with 20+ sensors, built to run for hours across an open floor plate with almost no walls or turns to navigate around. It is not a mixed-floor combo unit; it does one job, wet-scrubbing hard floors, at a scale the CC1 was never built for.

That's why it shows up in warehouses and 3PL facilities, manufacturing plants, malls, casinos, and airports and transit hubs — sites where the floor is one continuous hard surface stretching thousands of square feet, and the job is covering that ground overnight, not switching between five room types.

Side by side

| | Pudu CC1 | Gausium Scrubber 75 | | --- | --- | --- | | Type | 4-in-1 combo (sweep, scrub, vacuum, wash) | Dedicated large-area scrubber | | Runtime | ~5 hr scrubbing / sweep+vac+wash; ~9 hr wash-only | Multi-hour, built for large continuous runs | | Speed | Up to 1.2 m/s | Built for large open floor plates | | Best floor | Mixed: tile, carpet, vinyl in one building | One continuous hard-floor slab | | Best fit | Malls, offices, retail, mixed-floor hospitals | Warehouses, manufacturing, casinos, airports |

How to actually decide

Walk your building before you look at either spec sheet again:

1. Is your floor one surface or several? One long concrete or tile run favors the Scrubber 75. Several surface types in the same building favors the CC1.
2. How big is the open area? A single acre-plus slab is Scrubber 75 territory. A building broken into smaller rooms and corridors is CC1 territory.
3. Do you need proof of clean? If a compliance team or facilities auditor wants a log, the CC1 Pro's heatmap reporting is the reason to step up from the base CC1.
4. How many machines would you otherwise need? If the honest answer to "which robot fits this floor" is "three different ones," that's the case for a single CC1 doing the job of all three.

Get those four answers right and the choice is usually obvious. If it isn't, that's what a site walkthrough is for — see how to choose a commercial cleaning robot for the full decision process, or the type comparison if you're still deciding between scrubber, vacuum, sweeper, and combo as categories.

What doesn't change between them

Neither machine does the whole job on its own. Both clean the open floor on a schedule; people still handle corners, edges, and detail work. And a robot that's perfectly matched to your floor plan still fails if nobody deploys it correctly or can get it repaired fast when it breaks down.

That's the part we own regardless of which machine you pick:

• We match the model to your floor — CC1, CC1 Pro, Scrubber 75, or another unit from our lineup, based on a real walkthrough of your space.
• We deploy and map it — install, cleaning plan, and a crew walkthrough so it's cleaning the right area from day one.
• We finance it as a rental — month-to-month, so the wrong pick is never a stranded purchase.
• We service it nationwide — repairs and parts across all 50 US states, backed by 1,700+ service engineers in the US: 10-minute remote triage during business hours, 24-hour nationwide on-site dispatch, and 24/7 emergency response.

Common questions

Is the Pudu CC1 or the Gausium Scrubber 75 better? Neither is better in general — they're built for different floors. The CC1 is a compact combo unit for mixed-surface buildings like offices and malls. The Scrubber 75 is a dedicated large-area scrubber for big open hard floors like warehouses and airports.

Can the CC1 handle a warehouse? It's not built for it. The CC1 is sized and speed-rated for mixed indoor spaces with people walking through, not for covering acres of open concrete overnight. A warehouse-scale slab is Scrubber 75 or similar large-area equipment territory.

Can the Scrubber 75 clean carpet or a small office? No — it's a hard-floor scrubber built for scale, not a multi-surface combo unit. A building with carpet, tile, and vinyl in close proximity is a better fit for the CC1.

What's the difference between the CC1 and the CC1 Pro? Same base machine — 4-in-1 combo cleaning. The Pro adds an AI camera that catches leftover stains, triggers a spot re-clean, and logs a cleaning-quality heatmap, which matters for sites that need a documented proof of clean.

Tell us your floor plan

The right robot is the one that matches your building, not the one with the longer spec sheet. Tell us about your space and we'll recommend the model, quote the rental, and keep it running. You can also browse the cleaning robots we deploy or see the full cleaning robot lineup.